Working on fuel pump problem

The fuel pump comes on as soon as I turn the key...not the way it should work. 

Panel pictures

This is then time in the restoration that electronics get in my way. I'm comfortable wrenching but working with electrical components in a car intimidates me. I have a general idea how everything works but lack in depth knowledge on how to diagnose electronic problems in a car. But...this is why I love this car; it challenges me. I'll research and figure things out....no other way about it!

Panel today...I've only changed the LH and fuel pump relay. 

Need to find out where this connector goes:

I removed the fuel pump relay and when I turned on the key the fuel pump still came on. I was even able to start the car with the relay out....who knows what mess I have waiting for me. Just trying to find out where they hacked to power the fuel pump when turning the key on...

Fan shroud fixed

Broken fan shroud fixed with Q-Bond, cleaned and back in the car. Installed a working fan controller loaned out by Mr Porsche Parts Xtrordinair Roger Tyson. 

Drained the coolant that's been probably seating there for 5+ years and broke the radiator drain plug.

Cable resto

Very carefully I stripped the cables and wrapped it with Tesa tape and covered with McMaster-Carr wrap around sleeving...looks nice!

Cooling fans not working

Driver side cooling fan doesn't come on, passenger side fan only comes on when AC is turned on. Pull the fans out and tested; both working correctly. Checked the connection to the black finned fan control box, in the front, they look clean and tight, checked the hood switch; although I need to replace it...broken prawn legs...it's working, and the connections to the control box inside the car on passenger side also looks ok...hard to tell by just looking...what next?

Will be cleaning and wrapping these cables...looks ugly but the cables look ok. 

FIRST DRIVE!!!!!

This morning I drove my 928 for the first time. After filling the transmission with fluid...back and forth getting it to the right fluid levels I went for a short run. 

https://youtu.be/B8Pp1EbNxuk  

It still needs a lot of things but it drives!!!!

New grommets

Found close to perfect grommets on eBay 

The listing is for "NEW 10 mm rubber slip in funnel style rubber grommets BLACK pack of 5 (Made in the US). 

I basically cut right thru, attached it to the line and fitted it into the slot funnel inside...perfect fit.